CE Marking CE Mark Logo Requirements Standards Consultant Certificate Certification Consultancy in CE Markings Haryana Delhi India

 
 
 

CE Marking

 

CE Mark is required for certain exports to the European Market. These are made mandatory by Directives released by the European Union. The products requiring CE mark are: (this is not an exhaustive list)

 

DIRECTIVE No.
DIRECTIVE NAME
   
73/23/EEC Low Voltage Equipment (LVD)
87/404/EEC Simple Pressure Vessels
88/378/EEC Toys
89/106/EEC Construction Products (CPD)
89/336/EEC
92/31/EEC
Electromagnetic Compatibility (EMC)
89/392/EEC
REPEALED BY
98/37/EC
Machinery
89/686/EEC
93/95/EEC
96/58/EC
Personal Protective Equipment (PPE)
90/384/EEC Non-automatic Weighing Instruments
90/385/EEC Active Implantable Medical Devices (AIMD)
90/396/EEC Gas Appliances
92/42/EEC Efficiency of Liquid or Gaseous Fuelled Hot Water Boilers
93/15/EEC Explosives for Civil uses
93/42/EEC Medical Devices (MDD)
93/97/EEC
REPEALED BY
98/13/EC
Satellite Earth Station Equipment
94/9/EC Equipment in Potentially Explosive Atmospheres -"ATEX"
94/25/EC Recreational Craft
94/62/EC Packaging and Packaging Waste
95/16/EC Lifts
96/57/EC Energy Efficiency: Household Refrigerators & Freezers
98/79/EC In Vitro Diagnostic Medical Devices
97/23/EC Pressure Equipment (PED)
98/37/EC Machinery
1999/5/EC Radio & Telecom Terminal Equipment
2000/9/EC Cableway Installations for Passengers
2000/14/EC Noise Emission in the environment by equipment for use outdoors
   
 

Process of CE Marking ( self-certification mode ):

1. Study which directive is applicable

2. Determine which standards are applicable

3. Test your product to ascertain if it complies

4. Make a test report

5. Make Technical Construction File:

Technical documentation - The manufacturer must draw up a technical file (technical documentation).
The technical documentation is intended to provide information on the design, manufacture and operation
of the product. This is widely called 'Technical Construction File'.

6. Make a declaration that the product conforms to the standard(s).

7. Apply the CE mark on your product

 

Process of CE Marking ( third party-certification mode ):

1. The steps essentially remain the same.

2. In this case, the test must be made by a Notified Body.

3. The test report and declaration will be made by the Notified Body.

4. The CE Mark will carry a number linking to the Notified Body.

DISCLAIMER: This matter is reproduced here as a guide only. For authentic and up-to-date information,
please contact the Notified Body.

 

How to reproduce the CE Mark ?

The CE mark is covered by Council Decision 93/465/EC. Annex B(d) gives these guidelines:

1. The CE conformity marking must consist of the initials 'CE' taking the following form:

If the CE conformity marking is reduced or enlarged the proportions given in the above graduated drawing must be respected.

2. Where the directive concerned does not impose specific dimensions, the CE marking must have a height of at least 5 mm.

3. The CE marking must be affixed to the product or to its data plate. However, where this is not possible or not warranted on account of the nature of the product, it must be affixed to the packaging, if any, and to the accompanying documents, where the directive concerned provides for such documents.

4. The CE marking must be affixed visibly, legibly and indelibly.

 
 
 
 

© 2004 A B Associates. All Rights Reserved.

Brief Intro of A.B.Associates Consultancy Company

A B Associates - Leading ISO Consultancy Company, ISO Consultancy Certification in ISO 9000, ISO 14000, TS 16949, ISO 16949, ISO 14001, NABL, CE Mark Logo, SA 8000 Certification India, QS 9000 Certificate, HACCP Certification, HACCP for food industry, product certification, Quality Management Consultant Certification, Third party inspection agencies, Environment Management System in India. ISO Consultant Company provide ISO Certification in Delhi Haryana Northern India & All over India.

Quality Management Consultancy Organization with clients from Kalka, Varanasi, Lucknow, Yamunanagar, Kanpur, Mandi, Zirakpur, Chandigarh, Patiala, Kaithal, All over India.

Address :
Delhi: D1/32, Janakpuri, New Delhi, India Ph : 011-28521857 Mobile : 9416026963, 9911553990
Email : info@associatesab.com, kutkut02@yahoo.co.in    Web : http://www.associatesab.com